The voltages are within these ranges, but still no joy. My ds1820 adapters don't want to work. (the same error as ts)
On some schemes there's a pull-down(?) resistors on d+ line, on the others there is no resistor. Does it make any difference? What are the usual fuse settings for v-usb (external crystal means cksel=1111, sut=11? what else should I check?
On some schemes there's a pull-down(?) resistors on d+ line, on the others there is no resistor. Does it make any difference? What are the usual fuse settings for v-usb (external crystal means cksel=1111, sut=11? what else should I check?